Three frame sizes
The new TJ Series II tractors feature capacity-matched frames based on horsepower. A longer wheelbase on all frames and unique “center-pull” design adds to the stability, and enables the TJ Series II to deliver power where it counts – at the drawbar.
The row-crop chassis (TJ280 and TJ330) makes the TJ
Series II the only row-crop 4WD tractor with true 30-inch
row capability.
The larger chassis (TJ380 and TJ430) and high-capacity
chassis (TJ480 and TJ530) versions are designed for heavy-duty
agricultural and commercial uses.
Heavy-duty scraper models (TJ380HD, TJ430HD, TJ480HD
and TJ530HD) are rugged, wheel scraper models equipped
and weighted specifically for the rigorous demands of
scraping, grading, leveling and earthmoving. Equipped
with heavy-duty final drives, thick bar axles, Reynolds
Quick Hitch scraper drawbar and diff locks, TJ Series
II scraper models are operational with 16-, 17- or 18-yard
scrapers
More control
The massive power of the TJ Series II is matched by transmissions that provide a choice of work speeds and smooth-shifting performance. A 16x2 full powershift or 24x6 Hi-Low synchroshift transmission (TJ280, TJ330, TJ380 and TJ430 only) are available.
The clutch-free, push-button 16-speed powershift transmission
now features wider gears and extra clutch plates for
more torque-carrying capacity. The operator can conveniently
start travel in any of the first eight gears.
Also new on powershift transmissions is the convenience
of AutoShift™, which minimizes manual shifting during both field and road operations. In field operation, AutoShift automatically downshifts to maintain engine rpm and torque as load increases, then upshifts as load decreases. In road operation, AutoShift automatically selects the proper gears based on throttle input and road speed. Fuel-efficient AutoShift is standard on all powershift models.
The Custom Headland Management™ System, standard on powershift models with performance instrumentation, can be easily programmed to make complex headland turns a snap. One switch controls as many as 30 functions such as remotes, throttles, gear shifts and 3-point hitch to save valuable time at every turn.
The flexible 24x6 Hi-Low synchroshift transmission is
fully synchronized to allow easy shifting on the go with
a rolling load. Nine speeds are available in the 4- to
8.5-mph working range.
For even greater convenience and control, TJ Series
II tractors are available with factory-installed IntelliSteer™ auto-steering system. IntelliSteer provides state-of-the-art automated steering guidance and GPS-satellite technology to reduce inputs and enhance operator comfort and productivity for maximum field performance. The system automatically guides the tractor in straight lines with an accuracy of +/- 1 inch (2.5 cm) at speeds up to 18 mph (29 km/hr.)
More lighting options
Depending on the model, there are a total of 21 halogen work lamps that enable efficient night-time work. Eight of the lamps are adjustable. Up to eight high-intensity discharge (HID) lamps provide 350 feet of illumination to the marker trail during night operations. For added safety, rotating beacon lights can be added.
New cab exit lighting is standard. The operator can
set the lighting to remain on for up to two minutes after
the key is switched off to safely light the way out of
the cab when it’s dark.
More hydraulic flow & lift capacity for large implements
New Holland’s exclusive MegaFlow™ hydraulic option provides huge flow capacity and flexibility to power numerous functions at the same time without hindering performance. MegaFlow pumps up to an industry-leading 94 gallons per minute through two separate hydraulic pumps to meet the demand of power-hungry implements such as beet lifters, air seeders and laser land-leveling equipment. By utilizing two separate pumps, MegaFlow delivers dedicated hydraulic flow to the implement even while operating multiple hydraulic functions. Four remotes are standard, with an option of up to nine remotes.
The new TJ Series II also provides the highest wheel
tractor hitch lift capacity at up to 19,620 pounds. With
this optional three-point hitch, even extremely heavy
mounted planters, cultivators and specialized heavy rippers
won’t weigh it down to do more work in a single pass.
More comfort & convenience
The operator of a TJ Series II tractor works in comfort in the quiet, spacious cab that features a large workspace and finger-tip controls. The cab offers unmatched visibility with nearly 131 cubic feet of glass and 360-degree visibility.
No matter what the terrain, the comfortable new AutoComfort™ seat provides an ultra-smooth ride. The four-way adjustable heated suspension seat monitors vehicle ride and automatically adjusts to provide shock absorption and the heat control cycles on and off with a comforting massaging action to help reduce operator fatigue.
New Holland is a brand of CNH. A global leader in agricultural
and construction equipment and financial services. New
Holland sells and services an innovative and diverse
line of agricultural equipment, including a full line
of tractors as well as hay and forage equipment, harvesting,
crop production and material handling equipment.
Sales, parts and service are provided to customers by
New Holland dealers throughout the United States and
Canada. There are more than 1,200 New Holland dealerships
located throughout North America.
For more information on New Holland products, contact
your local New Holland dealer or visit the New Holland
Web site at www.newholland.com/na. |
