|
||
 |
 |
Model Specifications |
|
||||
|
PTO horsepower (kw) at 2,100 rpm |
105 (76.7) |
||
|
PTO torque rise |
60% |
||
|
Rated speed, full load, rpm |
2,200 |
||
|
Model |
New Holland |
||
|
Type |
Diesel |
||
|
Aspiration |
Turbocharged |
||
|
Cold starting |
Ether start and block heater |
||
|
Cylinders |
6 |
||
|
Displacement, cu. in. (L) |
456 (7.5) |
||
|
Idle speed |
700-800 rpm |
||
|
Maximum no load speed (high idle) |
2,370-2,420 rpm |
|
||||
|
Type |
Inboard planetary |
|
||||
|
Type |
Wet, four disc, hydraulically actuated |
|
Parking brake |
Twin cable mechanically operated using actuator assemblies of service brake |
|
||||
|
Cooling system, qt (L) |
26 (24.6) |
|
Engine oil (with filter), qt (L) |
18 (17) |
|
Front axle, gal (L) |
6.6 (25) |
|
Fuel tanks, gal (L) |
55 (208) |
|
Hydraulic reservoir fill with filter change, gal (L) |
10.5 (39.7) |
|
||||
|
Fan Type |
Steel 6 blade |
|
Size, in (mm) |
20 (508) |
|
Radiator pressure cap, psi (bar) |
14.5 (1.0) |
|
Thermostats (2): |
|
|
Starts to open |
178° F (81° C) |
|
Fully open |
203° F (95° C) |
|
||||
|
Type |
12-volt negative ground |
|
Alternator |
100 amps |
|
Dual Batteries |
950 cold cranking amps each |
|
Starter motor |
Positive engagement, solenoid operated 6.0 HP (4.5 kw) |
|
||||
|
Clearance, in (mm): |
|
||
|
Differentials |
20.9 (533) |
||
|
Drawbar rails |
20.2 (514) |
||
|
Axles |
21.9 (556) |
||
|
Height (to top of cab), in (mm) |
122 (3097) |
||
|
Inside tire dimension (min.), in (mm) |
42.6 (1082) |
||
|
Length, in (mm) |
183.8 (4669) |
||
|
Maximum operating weight, lb (kg) |
18,000 (8172) |
||
|
Turning Radius, in (mm) |
142.5 (3621) |
||
|
Wheelbase, in (mm) |
118 (3000) |
||
|
Width, in (mm) |
77.4-97.4 (1965-2474) |
|
||||
|
Injection pump type |
Bosch VE |
|
||||
|
Type |
Closed center, load sensing |
|
Displacement, gpm (lpm) |
30 (114) |
|
Pressure compensator setting, psi (bar) |
3,000 (207) at zero flow |
|
Pump type |
Variable displacement piston |
|
Quick couplers |
1/2 SAE standard/ISO type A |
|
Steering: |
|
|
Type |
Load sensing hydrostatic |
|
Maximum articulation angle |
45 degrees |
|
||||
|
Speeds, rpm: |
|
|
Standard cab end, dual speed |
540/1000 |
|
Engine end, optional dual speed |
540/1000 |
|
540 rpm: |
|
|
Shaft diameter, in (mm) |
1.375 (34.9) |
|
Number of splines |
6 |
|
1000 rpm: |
|
|
Shaft diameter, in (mm) |
1.375 (34.9) |
|
Number of splines |
21 |
|
Engine speed: |
|
|
@ 540 PTO rpm |
1,890 |
|
@ 1000 PTO rpm |
2,049 |
|
PTO brake |
Integral hydraulic brake |
|
PTO clutch |
Electric/hydraulic, multi-disc wet |
|
||||
|
Cab end (standard) |
CAT II |
|
Engine end (optional) |
CAT II |
|
Max. lift capacity 24 in. (610 mm) behind |
|
|
Cab end (with 1 external lift cylinder) |
6,500 (2948) |
|
Engine end |
4,000 (1814) |
|
Cab-end drawbar |
Standard |
|
Engine-end drawbar |
Optional |
|
||||
